Updated Nov 17, 2026· 6 min read

Key takeaways

  • Hardwired wall-mount floodlights – Connect to a junction box, typically at eave, soffit, or garage-wall height; the standard choice for permanent security lighting.
  • Hardwired flush or surface ceiling/soffit floodlights – Mount flat against a soffit or porch ceiling, often paired with a motion sensor for driveway or entryway coverage.
  • Plug-in corded floodlights – Use a standard household plug rather than a junction box, useful for garages, sheds, or temporary job-site lighting.
  • Dusk-to-dawn floodlights – Built-in photocell turns the light on automatically at dark and off at daylight, common for porch or yard lighting that should stay on all night.
  • Motion-sensor floodlights – Built-in passive infrared sensor triggers the light on movement, common for driveways, side yards, and security-focused installs.

A hardwired 120-volt LED floodlight with a motion or dusk-to-dawn sensor is the right choice for permanent outdoor security or area lighting on an existing fixture box, while a plug-in 120-volt floodlight on a cord suits a garage, workshop, or temporary setup where running new wiring is not practical.

What “120 volt” tells you about a floodlight

120 volts is the standard household AC supply in the United States, so a fixture labeled this way is built to connect directly to a home’s existing wiring or a standard outlet rather than to a low-voltage landscape lighting transformer or a battery/solar system. That distinction matters because low-voltage landscape floodlights (commonly 12-volt) look similar in catalogs but use entirely different wiring, transformers, and mounting hardware. Confirm the voltage rating on any floodlight listing before buying if you are replacing an existing fixture, since swapping a 120-volt fixture into a low-voltage landscape circuit, or the reverse, will not work safely.

Mounting and power styles

  • Hardwired wall-mount floodlights – Connect to a junction box, typically at eave, soffit, or garage-wall height; the standard choice for permanent security lighting.
  • Hardwired flush or surface ceiling/soffit floodlights – Mount flat against a soffit or porch ceiling, often paired with a motion sensor for driveway or entryway coverage.
  • Plug-in corded floodlights – Use a standard household plug rather than a junction box, useful for garages, sheds, or temporary job-site lighting.
  • Dusk-to-dawn floodlights – Built-in photocell turns the light on automatically at dark and off at daylight, common for porch or yard lighting that should stay on all night.
  • Motion-sensor floodlights – Built-in passive infrared sensor triggers the light on movement, common for driveways, side yards, and security-focused installs.

At a glance: 120-volt floodlight types

Type Best for Key stated specs Limits
Hardwired motion-sensor floodlight Driveways, side yards, security lighting Lumen output, detection range and angle, adjustable sensitivity and timer stated by maker Needs an existing junction box; false triggers possible from pets or passing traffic
Hardwired dusk-to-dawn floodlight Porches, yards needing light all night Lumen output, color temperature, built-in photocell threshold Runs the full night, higher energy use than motion-only units
Plug-in corded floodlight Garages, sheds, temporary job lighting Cord length, lumen output, often a clamp or tripod mount Needs a nearby outlet; less weatherproof mounting than hardwired units in some models
Dual-head adjustable floodlight Covering two angles from one fixture, such as a driveway and a side gate Independently adjustable heads, combined lumen output Larger fixture body, may need a wider mounting surface
Smart/Wi-Fi-enabled floodlight Remote on/off control or app-based scheduling App control, sometimes camera or alert integration stated by maker Depends on home Wi-Fi reliability; added setup step versus a simple switch

Lumen output and coverage

Floodlight listings generally state total lumen output rather than wattage alone, since LED fixtures produce far more light per watt than older halogen or incandescent floodlights did. For a driveway or backyard security application, makers often list a suggested coverage area or detection range alongside the lumen figure; matching that figure to the actual distance you need lit, rather than buying the single brightest option available, tends to give better results and avoids excessive glare into neighboring windows. Color temperature, usually listed in Kelvin, affects how the light looks rather than how bright it is; cooler, bluish-white light is common for security fixtures while warmer tones are more common for porch or entryway lighting.

Installation and safety notes

Hardwired floodlights should be installed with the circuit breaker off and, where local code requires it, by or with sign-off from a licensed electrician, particularly if the existing junction box or wiring needs any modification. Outdoor fixtures should carry a weather-resistant rating suited to the mounting location, and any exposed connections should be sealed per the manufacturer’s manual to prevent moisture intrusion. If a GFCI-protected circuit is not already present at an outdoor junction box, check local code requirements, since many jurisdictions require GFCI protection for exterior lighting circuits.

Pick X if…

Choose this If…
Hardwired motion-sensor floodlight You want the light to activate only when something moves, for security or energy savings
Hardwired dusk-to-dawn floodlight You want steady light all night without manual switching
Plug-in corded floodlight You need lighting where there is no junction box, such as a garage interior
Dual-head adjustable floodlight One fixture location needs to cover two different angles
Smart/Wi-Fi floodlight You want remote scheduling or app-based control over a simple on/off switch

Alternatives worth considering

Low-voltage (12-volt) landscape floodlights are worth considering instead if the goal is accent or pathway lighting rather than full-area security coverage, since they run cooler, use less energy, and are easier for a non-electrician to install with a transformer kit. Solar-powered motion floodlights avoid any wiring at all and suit detached structures without power access, though output and run time depend on daily sun exposure. A full outdoor security camera with an integrated floodlight is worth a look for buyers who want lighting and recording in one fixture, though it adds cost and, for networked models, a dependency on home Wi-Fi.

Weather rating and climate considerations

Outdoor fixtures typically carry an ingress-protection or wet/damp-location rating that describes how well the housing resists moisture and dust, and this rating should be checked against the actual mounting location rather than assumed from the product category alone. A fixture mounted under a deep eave facing away from prevailing wind and rain generally sees less direct moisture exposure than one mounted on an exposed gable wall, which can influence how conservative a buyer needs to be about the stated rating. In colder climates, confirm the fixture’s stated operating temperature range covers winter lows, since some LED drivers and photocells perform less reliably in extreme cold, and condensation inside a poorly sealed housing can lead to premature failure.

LED floodlights also generate heat that needs to dissipate through the housing’s heat sink fins; mounting a fixture in a fully enclosed, unventilated recess can shorten its usable life compared with the open mounting most makers design and test around. Following the manufacturer’s stated clearance recommendations around the fixture body helps it perform closer to its rated lifespan.

Frequently Asked Questions

Can I replace an old halogen floodlight with an LED one on the same wiring?

In most cases yes, since both are standard 120-volt fixtures, but check that the new fixture’s junction-box mounting pattern and wire connections match before buying, and turn off the circuit breaker before working on the fixture. If the existing box or wiring looks damaged or undersized, have an electrician inspect it first.

How do I stop a motion floodlight from triggering on pets or passing cars?

Most motion floodlights have adjustable sensitivity and detection angle settings; narrowing the angle or lowering sensitivity per the manufacturer’s instructions usually reduces false triggers from small animals or street traffic. Mounting height and aim angle also affect what the sensor picks up.

Do I need a GFCI outlet or breaker for an outdoor floodlight?

Many local electrical codes require GFCI protection for exterior lighting circuits, so check your local code or ask an electrician rather than assuming your existing circuit is compliant. This is especially worth confirming on older homes where exterior wiring may predate current code requirements.

What does the detection range spec actually mean for motion models?

It is the maximum distance, as stated by the maker, at which the built-in sensor reliably detects movement under typical conditions; actual range can be affected by mounting height, angle, and obstructions like plants or fences. Adjustable-angle models let you fine-tune coverage after installation.

Will a plug-in floodlight work outdoors?

Only if it is specifically rated for outdoor or wet-location use; check the fixture’s listed weather rating and the cord and plug’s outdoor rating before using it outside, and plug it into a GFCI-protected outdoor outlet. Using an indoor-rated plug-in fixture outside is not a safe substitute for a weatherproof model.

Does a higher lumen rating always mean better security lighting?

Not necessarily; excessive brightness aimed poorly can create glare or harsh shadows that make it harder to see detail, and it may also disturb neighbors. Matching lumen output and beam angle to the actual area you need lit generally gives better practical visibility than maximizing brightness alone.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.